When Front CROSSMEMBER Has Been Removed

Install the oil level switch and the clip (A) to the oil pan upper.
NOTE:
- Use new O-rings.
- Apply a coat of engine oil to the O-rings.
Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 1: Locating Oil Level Switch Bolts
Courtesy of SUBARU OF AMERICA, INC.
Connect the connector of oil level switch to the engine harness, and install the clip (A) securing the harness.

Fig 2: Locating Oil Level Switch Connector And Clip
Courtesy of SUBARU OF AMERICA, INC.
Install the front crossmember. <Ref. to INSTALLATION , Front Crossmember.>