Sunroof Switch: Inspection
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the harness connector of sunroof switch.
- Measure the resistance between connector terminals.
Connector Terminal No . Inspection conditions Standard (b): Slide switch 1 - 3 OPEN Less than 1 Ω 4 - 3 CLOSE Less than 1 Ω (a): Tilt switch 4 - 3 Tilt down Less than 1 Ω 1 - 3 Tilt up Less than 1 Ω - Replace the sunroof switch if the inspection result is not within the standard value.