LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Starting System & Charging System) >> Battery Cable Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Battery Cable Assembly: Removal

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal (A) and remove the ground cable from the clip (B).
  2. Disconnect the ground terminal (C) and remove the battery cable holder (D).
  3. Remove the battery sensor harness from the clip (E).
    G14601655Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the terminal (A), terminal (B) and terminal (C).
    G14601656Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the slow blow fuse from the terminal base.
    G14601657Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the terminal of battery cable assembly from the terminal base.
    G14601658Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the terminal (A) and the terminal (B), and remove the slow blow fuse (C).
    NOTE:

    Perform this procedure only when required. 

    G14601659Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the V-belt covers.
    G14601660Courtesy of SUBARU OF AMERICA, INC.
  9. Disconnect the connector (A), connector (B) and terminal (C), and remove the clip (D) and clip (E).
    G14601661Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>REMOVAL .
  11. Disconnect the connector.
    G14601662Courtesy of SUBARU OF AMERICA, INC.
  12. Disconnect the terminal B (A) and ground terminal (B). (CVT model)
    CAUTION:

    In order to prevent damaging the ground terminal, fix the ground terminal when loosing the bolt, and avoid the part from rotating together while loosening the bolt. 

    G14601663Courtesy of SUBARU OF AMERICA, INC.
  13. Disconnect the connector (A), terminal B (B) and ground terminal (C). (MT model)
    CAUTION:

    In order to prevent damaging the ground terminal, fix the ground terminal when loosing the bolt, and avoid the part from rotating together while loosening the bolt. 

    G14601664Courtesy of SUBARU OF AMERICA, INC.
  14. Release the claw securing the battery cable assembly to the intake manifold assembly.
    G14601665Courtesy of SUBARU OF AMERICA, INC.
  15. Disengage the claw securing the battery cable assembly to the bracket, and remove the battery cable assembly.
    G14601666Courtesy of SUBARU OF AMERICA, INC.
  16. Remove the terminal base.
    NOTE:

    Perform this procedure only when required. 

    G14601667Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals