LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel Injection System) >> Mass Air Flow and Intake Air Temperature Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mass Air Flow and Intake Air Temperature Sensor: Removal

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Disconnect the connector (A) and remove the mass air flow and intake air temperature sensor.
    G14601044Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals