Door Switch: Inspection
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the resistance between connector terminals.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Front
| Terminal No. |
Inspection conditions |
Standard |
| 2 - 1 |
When the switch is not pressed |
Less than 1 Ω |
| When the switch is pressed |
1 MΩ or more |
- Rear
| Terminal No. |
Inspection conditions |
Standard |
| 2 - 1 |
When the switch is not pressed |
Less than 1 Ω |
| When the switch is pressed |
1 MΩ or more |
- Replace the door switch assembly if the inspection result is not within the standard value.