LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Arm >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Arm: Removal

  1. Lift up the vehicle, and then remove the front wheels.
  2. Remove the under cover - front. <Ref. to REMOVAL , Front Under Cover.>
  3. Remove the front arm assembly.
    1. Remove the bolt, and then detach the front support.
    2. Remove the bolts and nuts, and then remove the front arm rear plate.
    3. Remove the nut and disconnect the stabilizer link.
    4. Pull out the cotter pin (a), remove the castle nut (b), and remove the ball joint assembly from front arm assembly.
    5. Remove the nuts, pull out the flange bolt, and remove the front arm assembly.
    Fig 1: Locating Front Arm Assembly Bolts
    G10269444Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals