Clutch Switch (Cruise Control)

1. Install the clutch switch.
2. Move the clevis pin of push rod to left and right, retain it at the position where it moves smoothly, and measure the clutch pedal stroke.

   Clutch pedal full stroke A: 

   STI model 

   130 - 135 mm (5.12 - 5.31 in) 

   Except for STI model 

   135 - 140 mm (5.31 - 5.51 in) 

   Tightening torque: 

   T: 8 N.m (0.8 kgf-m, 5.9 ft-lb) 

   Fig 1: Checking Clutch Pedal Full Stroke A

   Courtesy of SUBARU OF AMERICA, INC.
3. If the clutch pedal stroke is out of specification, adjust the stroke. <Ref. to ADJUSTMENT , Clutch Pedal.>
4. Connect the clutch switch connector.
5. Thereafter, install in the reverse order of removal.

Tightening torque: 

Knee airbag module 

7.5 N.m (0.76 kgf-m, 5.5 ft-lb)