Inspection Mode 4
| Code | Description & trouble part | Note |
|---|---|---|
| B2B03 | Driver's Door Power Window Pulse1 and 2 No Signal | - |
| B2B04 | Driver's Door Power Window Pulse 1 No Signal | - |
| B2B05 | Driver's Door Power Window Pulse 2 No Signal | - |
| B2B06 | Driver's Door Power Window Pulse Direction | - |
| B2B07 | Driver's Door Power Window Position | - |
| B2B08 | Driver's Door Power Window Continuous Reversal | - |
| B2B09 | Driver's Door Power Window Control Module EEPROM | - |
| B2B23 | Passenger's Door Power Window Pulse 1 and 2 No Signal | - |
| B2B24 | Passenger's Door Power Window Pulse 1 No Signal | - |
| B2B25 | Passenger's Door Power Window Pulse 2 No Signal | - |
| B2B26 | Passenger's Door Power Window Pulse Direction | - |
| B2B27 | Passenger's Door Power Window Position | - |
| B2B28 | Passenger's Door Power Window Continuous Reversal | - |
| B2B29 | Passenger's Door Power Window Control Module EEPROM | - |
| B2B50 | POWER WINDOW MAIN SWITCH FAILURE | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Power Window (Switch)], [Power Window (Driver)] or [Power Window (Passenger)]. Ref. to COMMON (diag)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the [Power Window (Switch)], [Power Window (Driver)] or [Power Window (Passenger)] DTC and check that the concerned DTC is not displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.
- After initialization operation Ref. to POWER WINDOW (DIAGNOSTICS)>Work Support>NOTE , pull up and press down power window switch at a passenger's own seat, and check that the window rolls up and down automatically.
- Using the Subaru Select Monitor, read the [Power Window (Switch)], [Power Window (Driver)] or [Power Window (Passenger)] DTC and check that the concerned DTC is not displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.