Stabilizer Bushing
- Before installation, inspect the following items and replace any faulty part with a new one.
Check the stabilizer bushing for abnormal cracks, fatigue or damage.
- Install the bushing - stabilizer.
- Install the clamp - stabilizer bushing.
Tightening torque:
25 N.m (2.5kgf-m, 18.4ft-lb)
- Install the front exhaust pipe. Ref. to EXHAUST (H4DO)>Front Exhaust Pipe>INSTALLATION .
- Install the crossmember support - rear.
Tightening torque:
70 N.m (7.1kgf-m, 51.6ft-lb)
- Install the under cover - front.
Tightening torque:
18 N.m (1.8kgf-m, 13.3ft-lb)