LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Keyless Entry Control Module >> Installation >> 4 Door Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

4 Door Model

  1. Install the keyless entry control module.

    Tightening torque: 

    7.5N.m (0.8kgf-m, 5.5ft-lb)

  2. Install the trim panel assembly - rear shelf. Ref. to EXTERIOR/INTERIOR TRIM>Rear Shelf Trim>INSTALLATION .
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  4. When the keyless entry control module is replaced, register the transmitter ID. (Model with TPMS) Ref. to TIRE PRESSURE MONITOR (DIAGNOSTICS)>Register Transmitter (ID)>OPERATION .
scientia non olet · About LEMON Manuals