October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Knock Sensor: Removal
- Disconnect the ground terminal from battery sensor. Ref. to NOTE>NOTE>BATTERY
.
- Remove the clip (A) from the air intake boot.
- Loosen the clamp (B) securing the air cleaner case (rear) to the air intake boot.
- Loosen the clamp (C) which secures the throttle body to the air intake boot.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the air intake boot from the throttle body, and place the air intake boot aside so that it does not interfere with the work.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Disconnect the connector from the knock sensor.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the knock sensor from cylinder block.
 Courtesy of SUBARU OF AMERICA, INC.
|