Auto Headlight Beam Leveler Control Module: Installation

CAUTION: Before handling the airbag system components, always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION .

Install each part in the reverse order of removal.
Tightening torque:

Relay & fuse box: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
NOTE: When the auto headlight beam leveler CM is removed, perform initialization or reinitialization. Ref. to LIGHTING SYSTEM>Auto Headlight Beam Leveler System>PROCEDURE .