LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Auto Headlight Beam Leveler Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto Headlight Beam Leveler Control Module: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover assembly - instrument panel LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the bolts, and then remove the panel - knee guard.
    G10272470Courtesy of SUBARU OF AMERICA, INC.
  4. Release the lock and remove the relay holder.
    G10277273Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the auto headlight beam leveler Control Module.
    1. Remove the nut.
    2. Disconnect the connector and remove the auto headlight beam leveler Control Module.
    G10277274Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals