Entertainment System: Camera: Installation: Rear

Sedan model
1. Install the rearview camera assembly.
2. Install the garnish - trunk.
  Tightening torque:
  
  4.5 N.m (0.5 kgf-m, 3.3 ft-lb)
3. Install the trim panel - trunk lid.
4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
5. Check the screen display and the guide line position. Ref. to ENTERTAINMENT & MONITORING>Camera>INSPECTION .
OUTBACK model
1. Install the rearview camera assembly.
2. Install the garnish assembly - rear gate.
  Tightening torque:
  
  4.5 N.m (0.5 kgf-m, 3.3 ft-lb)
3. Install the trim panel - rear gate.
4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
5. Check the screen display and the guide line position. Ref. to ENTERTAINMENT & MONITORING>Camera>INSPECTION .