LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> Hill Hold Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hill Hold Switch: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover assembly - front. Ref. to EXTERIOR/INTERIOR TRIM>Console Box>REMOVAL .
  3. Release the claws and remove the hill hold switch.
    G10272392Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals