LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> VDC Sequence Control >> Operation >> VDC Sequence Control With SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VDC Sequence Control With SUBARU Select Monitor

NOTE: In the event of any trouble, sequence control will not operate.
  1. Connect the Subaru Select Monitor.
    NOTE: For detailed operation procedures, refer to "Application help".
    1. Turn the ignition switch to ON.
    2. On <<Start>> display, select <<Diagnosis>>.
    3. On <<Vehicle selection>> display, input the target vehicle information and select <<Confirmed>>.
    4. On <<Main Menu>> display, select <<Each System>>.
    5. On <<Select System>> display, select <<Brake Control System>> and select <<Enter>>.
    6. From the function selection item list, select <<Work Support>>.
    7. On <<Work Support>> display, select <<VDC Function Check Mode>>.
  2. Operate according to the procedures displayed in the Subaru Select Monitor.
  3. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals