LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System (Except For STI) >> Oil Level Switch >> Installation >> When Front CROSSMEMBER Has Been Removed
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When Front CROSSMEMBER Has Been Removed

  1. Install the oil level switch and the clip (A) to the oil pan upper.
    NOTE:
    • Use new O-rings.
    • Apply a coat of engine oil to the O-rings.

    Tightening Torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

    G09476529
  2. Connect the connector of oil level switch to the engine wiring harness, and install the clip (A) securing the harness.
    G09476614
  3. Install the front crossmember. Ref. to FRONT SUSPENSION>Front Crossmember>INSTALLATION .
scientia non olet · About LEMON Manuals