LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Mechanical System) >> Engine Mounting >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Engine Mounting: Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine mounting onto the engine.

    Tightening torque: 

    35 N.m (3.6 kgf-m, 25.8 ft-lb)

  2. Install the crossmember COMPL front. Ref. to FRONT SUSPENSION>CROSSMEMBER>INSTALLATION
scientia non olet · About LEMON Manuals