Active Test: Operation
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Be sure to perform the active test while the engine is not running.
- After executing the active test, execute the Clear Memory Mode. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(DIAGNOSTICS)>Clear Memory Mode .
- On «Start» display, select «Diagnosis».
- On «Vehicle selection» display, input the vehicle information and select «Confirmed».
- On «Main Menu» display, select «Each System».
- On «Select System» display, select «Transmission Control System».
- On «Select Function» display, select «Active Test».
Item SSM display Execution condition Activating the actuator ON/OFF F&R Clutch Solenoid When all of the following conditions are met: - P range
- Ignition switch is ON (engine stops)
- Battery voltage is 10.9 V or more
Secondary Solenoid Primary Down Solenoid Primary Up Solenoid AWD Solenoid Lock-Up Duty Solenoid Lock-Up ON/OFF Solenoid NOTE: For detailed operation procedures, refer to "Application help".