Drive Cycle X
WARNING: This page is about a different variant/trim than selected.
| DTC | Item | Condition |
|---|---|---|
| P2004 | TGV CONTROL STUCK OPEN BANK 1 | - |
| P2005 | TGV CONTROL STUCK OPEN BANK 2 | - |
| P2006 | TGV CONTROL STUCK CLOSED BANK 1 | - |
| P2007 | TGV CONTROL STUCK CLOSED BANK 2 | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory for «Engine». Ref. to ENGINE (DIAGNOSTICS) (STI)>Clear Memory Mode>OPERATION .
- Idle the engine for 10 seconds or more after engine start.
- Place the gear shift lever in neutral position, and race the engine for 10 seconds or more.NOTE: Keep the engine speed at 3500 rpm or more.
- Read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to ENGINE (DIAGNOSTICS) (STI)>Read Diagnostic Trouble Code (DTC)>OPERATION .