October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
VDC Control Module Parameter Reading
- Perform reading of parameter.
- Connect the Subaru Select Monitor.
NOTE:
For detailed operation procedures, refer to "Application Help".
- Turn the ignition switch to ON.
- On «Start» display, select «Diagnosis».
- On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
- On «Main Menu» display, select «Each System».
- On «Select System» display, select «Brake Control System» and select «Enter».
- On «Select Function» display, select «Work Support».
- On «Work Support» display, select «Reading of parameter: ECM to SSM».
- Save and close the file.