LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Suspension >> Front Suspension System And Wheel Alignment >> Wheel Alignment >> Adjustment >> Front Camber
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Camber

  1. Adjust the camber angle to the following value.
    Camber (difference between RH and LH 35' or less)
    0°00'±0°30'
  2. Loosen the two self-locking nuts while holding the strut assembly bolts.
  3. Turn the camber adjusting bolt so that the camber is set at specification.
    NOTE: Moving the adjusting bolt by one scale changes the camber by approximately 0°10'.
    G13199284Courtesy of SUBARU OF AMERICA, INC.
    To increase camber.
    Rotate the left side counterclockwise. Rotate the right side clockwise.
    G06654859Courtesy of SUBARU OF AMERICA, INC.
    G06654860Courtesy of SUBARU OF AMERICA, INC.
    To decrease camber.
    Rotate the left side clockwise. Rotate the right side counterclockwise.
    G06654860Courtesy of SUBARU OF AMERICA, INC.
    G06654859Courtesy of SUBARU OF AMERICA, INC.
  4. Tighten two new self-locking nuts.
    NOTE:
    • First, tighten the adjusting bolt (upper side) to the specified torque.
    • While holding the bolt side, tighten the nut to the specified torque.

    Tightening torque: 

    155 N.m (15.8 kgf-m, 114.3 ft-lb)

scientia non olet · About LEMON Manuals