LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Rear Drive Shaft >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Drive Shaft: Installation

  1. Select the thrust needle bearing. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>REAR DRIVE SHAFT>ADJUSTMENT .
  2. Install the selected thrust needle bearing to transfer clutch assembly.
    NOTE: Install the thrust needle bearing in the correct direction.
    G13200125Courtesy of SUBARU OF AMERICA, INC.
  3. Install the rear drive shaft.
  4. Install the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>EXTENSION CASE>INSTALLATION .
  5. Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals