Unit Inspection

Console switch ASSY check

Check that the VSC (VDC) OFF switch is not sticking.

Check the resistance between the VSC (VDC) OFF switch terminals.

Criteria

Inspection terminals	Inspection conditions	Criteria
5 - 8	When the switch is not being operated	10 k Ω or more
5 - 8	When the switch is being operated.	Less than 1 Ω

Check that the TRACK mode switch is not sticking.

Check the continuity between the TRACK mode switch terminals.

Criteria

Inspection terminals	Inspection conditions	Standard value
1 - 8	When the switch is not being operated	10 k Ω or more
1 - 8	When the switch is being operated.	Less than 1 Ω

Courtesy of SUBARU OF AMERICA, INC.

Check the illumination operation.

Check the illumination operation when battery voltage is applied between connector terminals.

Criteria

Battery connection	Standard value
Battery positive →2 Battery negative →3	Illumination comes ON.