LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Stability Control (VSC) System >> Vehicle Stability Control System >> Checking/Clearing Diagnostic Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking/Clearing Diagnostic Codes

  1. Diagnostic code output check
    1. Diagnostic code reading by SSM4
      1. Turn the ignition switch to OFF and connect the SSM4 to the DLC3.
      2. Turn IG ON and follow SSM4's display to read the diagnostic code.
        CAUTION: If there is an error, clear the diagnostic code memory after repairing.
  2. Clear the diagnostic code and the freeze frame data.
    1. Diagnostic code clearance by SSM4
      1. Turn the ignition switch to OFF and connect the SSM4 to the DLC3.
      2. Turn IG ON and follow SSM4's display to clear the diagnostic code.
scientia non olet · About LEMON Manuals