LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Keyless Transmitter >> Replacement >> Registration Of Keyless Transmitter With Subaru Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Registration Of Keyless Transmitter With Subaru Select Monitor

NOTE:
  • A maximum of four keyless transmitters can be registered for each individual vehicle.
  • When replacing or adding the keyless transmitter, new registration of transmitter is necessary.
  1. Register the transmitter.
    1. Connect the Subaru Select Monitor.
    2. Turn the ignition switch to ON.
    3. On [Start] screen, select [Diagnosis].
    4. On [Select Vehicle] screen, input the target vehicle information and select [OK].
    5. On [Main Menu] screen, select [Each System].
    6. On [Select System] screen, select [Keyless Entry], and then select [Next].
    7. On [Select Function] screen, select [Work Support].
    8. On [Work Support] screen, select [Keyless ID registration].
    9. According to the directions on the screen, press the button of the transmitter to be registered in order of Lock → Unlock. (When registration completed: buzzer sounds once.)
      NOTE:
      • Repeat the procedure as many times as the number of transmitters to be registered.
      • When attempting to register a key that has already been registered, the buzzer sounds twice.
    10. Press the Exit button to finish the operations.
scientia non olet · About LEMON Manuals