LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> VDC Control Module And Hydraulic Control Unit (VDCCM And H/U) >> Maintenance Mode >> VDCCM Parameter Reading
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

VDCCM Parameter Reading

  1. Perform reading of parameter.
    1. Connect the Subaru Select Monitor.
    2. Turn the ignition switch to ON.
    3. On [Start] screen, select [Diagnosis].
    4. On [Select Vehicle] screen, input the target vehicle information and select [Set].
    5. On [Main Menu] screen, select [Each System].
    6. On [Select System] screen, select [Brake Control], and then select [Enter].
    7. On [Select Function] screen, select [Work Support].
    8. On [Work Support] screen, select [Reading of parameter: ECM to SSM].
  2. Save and close the file.
scientia non olet · About LEMON Manuals