Ball Joint: Inspection
- Check that there is no looseness by moving the upper and lower portions of front tire in an axial direction with the brake pedal depressed.
- Looseness exists -> Replace the ball joint COMPL. Refer to FRONT SUSPENSION>BALL JOINT>REMOVAL .
- Check that there is no looseness by moving the upper and lower portions of front tire in an axial direction with the brake pedal released.
- Looseness exists → Check the front hub unit bearing, Refer to PROPELLER SHAFT/DRIVE SHAFT/AXLE>FRONT HUB UNIT BEARING>INSPECTION .
- Replace the ball joint COMPL if the boot is damaged when visually inspecting the boot.