October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Select Lever: Removal
- Disconnect the ground terminal from battery sensor.
Refer to REPAIR CONTENTS>NOTE>BATTERY
.
- Remove the mat center tray.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Release the shift lock using a screwdriver, etc. and shift the select lever to the "N" range.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Lower the section (A) of the boot.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the clamp (A) and remove the grip.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the boot.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the cover center side RH and the cover center side LH.
Refer to EXTERIOR/INTERIOR TRIM>Center Console>REMOVAL
.
- Remove the duct console center. (Models with rear seat air conditioning)
Refer to AIR CONDITIONER>Air Vent Duct>REMOVAL>CONSOLE DUCT>CENTER
.
- Remove the select cable.
Refer to CONTROL SYSTEMS>Select Cable>REMOVAL .
- Disconnect the connector.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the bolts which secure the select lever.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the clip securing the harness, and remove the select lever.
 Courtesy of SUBARU OF AMERICA, INC.
|
 Courtesy of SUBARU OF AMERICA, INC.
|