OUTBACK model
CAUTION:
- Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
- Side impact sensor (under the rear center seat) for the airbag system is located under the front center of the rear seat cushion. Be careful not to apply strong impact to the sensor when working with the rear seat cushion removed.
- Install the speaker assembly woofer.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the trim panel assembly apron LH. Refer to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>INSTALLATION>OUTBACK model .
- Install the pad rear side and rear seat cushion assembly. Refer to SEATS>Rear Seat>INSTALLATION .
- Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .