LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Hazard Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Hazard Switch: Installation

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Install the switch hazard.
  2. Install the unit bracket LH.
  3. Install the center information display assembly and the ornament panel mid passenger. Refer to ENTERTAINMENT & MONITORING>Cockpit Display>INSTALLATION .
  4. Install the cover assembly front. Refer to EXTERIOR/INTERIOR TRIM>Console Box>INSTALLATION .
  5. Install the grip and boot. Refer to CONTROL SYSTEMS>Select Lever>INSTALLATION .
  6. Install the cover center UPR or the driver monitoring unit assembly. Refer to INSTRUMENTATION/DRIVER INFO>Driver Monitoring Unit>INSTALLATION .
  7. Install the visor assembly. Refer to INSTRUMENTATION/DRIVER INFO>Combination Meter>INSTALLATION .
  8. Install the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>INSTALLATION .
  9. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals