Inspection Mode 7
| DTC | Description and trouble part | Note |
|---|---|---|
| B2B12 | Passenger's Door Power Window Driver's Door Manual Down Switch Stuck | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Power Window (Driver)]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.
- Using the driver's side power window switch, operate the manual down feature and check that the window rolls down.
- Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.