Check Relay
- Measure the resistance between relay terminals.
- Except for hybrid model
Terminal No. Inspection conditions Standard Circuit 9 - 8 Always 1 MΩ or more 9 - 6 Always Less than 1 Ω 9 - 8 Apply battery voltage between terminals 5 and 7. Less than 1 Ω - Hybrid model
Terminal No. Inspection conditions Standard Circuit 13 - 12 Always 1 MΩ or more 13 - 10 Always Less than 1 Ω 13 - 12 Apply battery voltage between terminals 11 and 9. Less than 1 Ω - Replace the relay if the inspection result is not within the standard value.