LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Suspension >> Front Suspension System And Wheel Alignment >> Stabilizer >> Removal >> Stabilizer
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Suspension System And Wheel Alignment: Stabilizer: Removal: Stabilizer

  1. Lift up the vehicle.
  2. Remove the under cover - front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  3. Remove the crossmember support - rear. Ref. to FRONT SUSPENSION>CROSSMEMBER SUPPORT>REMOVAL .
  4. Remove the front exhaust pipe. Ref. to EXHAUST (H4DO (EXCEPT FOR HEV))>FRONT EXHAUST PIPE>REMOVAL .
  5. Remove the left and right stabilizer links (bottom part).
    G12400565Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the clamp - stabilizer bushing on the left and right sides.
    G11253795Courtesy of SUBARU OF AMERICA, INC.
  7. Slide the stabilizer to the right side of the vehicle.
    G13620820Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the stabilizer by moving it in the direction of arrow.
    G13620821Courtesy of SUBARU OF AMERICA, INC.