CVT Transaxle (Tr580 CROSSTREK): General Description: Specification

Transmission	Type			Forward continuously variable speed change, 1-reverse
	Gear ratio (including transfer reduction ratio)		Forward	4.066 - 0.503
			Reverse	4.379
	Number of forward clutch plates	pcs.	Drive plate	3
			Driven plate	3
	Number of reverse brake plates	pcs.	Drive plate	4
			Driven plate	4
	CVTF capacity L (US qt, Imp qt)		2.0 L model	9.93 - 10.43 (10.496 - 11.025, 8.739 - 9.179)
			2.5 L model	11.02 - 11.52 (11.648 - 12.177, 9.699 - 10.139)
Torque converter	Type			Symmetric, 3-element, single stage, 2-phase
	Nominal	mm (in)	2.0 L model	215 (8.46)
			2.5 L model	236 (9.3)
	Clutch			Sprag type one-way
	Stall torque ratio		2.0 L model	2.32
			2.5 L model	2.18
	Stall speed (at sea level) r/min	2.0 L model	D range	2, 150 - 3, 050
			R range	2, 100 - 3, 000
		2.5 L model	D range	1, 950 - 2, 550
			R range	1, 850 - 2, 450
Oil pump	Type			2 port vane
	Driving method			Chain drive
Transfer	Type			Multi-plate
	Control method			Electronic hydraulic type
	Number of transfer clutch plates	pcs.	Drive plate	5
			Driven plate	5
	Gear ratio			1.000
Front differential	Type of gear			Hypoid gear
	LSD type			-
	Gear ratio		2.0 L model	3.900
			2.5 L model	3.700
	Backlash between the differential bevel gear and differential bevel pinion		mm (in)	0.13 - 0.18 (0.005 - 0.007)
	Hypoid gear set backlash		mm (in)
	Differential gear oil capacity		L (US qt, Imp qt)	1.22 - 1.30 (1.290 - 1.374, 1.074 - 1.144)

CVTF:

Refer to "RECOMMENDED MATERIALS" for CVTF. Ref. to RECOMMENDED MATERIALS .

CAUTION: Always use specified CVTF. Using fluid other than specified CVTF will cause malfunction.

NOTE: In order to avoid improper filling of CVTF, the upper part of the filler plug hole is stamped with the mark of CVTF-3.

Differential gear oil:

For the differential gear oil, refer to "RECOMMENDED MATERIALS". Ref. to RECOMMENDED MATERIALS .