LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Audio System >> Operation >> Check Connections With Line Diag Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Connections With Line Diag Mode

  1. Turn the ignition switch to ACC.
  2. Press the button (b) twice with the button (a) pressed.
    G11246736Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Pressing the button (a) for 3 seconds or more, or turning the ignition switch from the OFF to ACC position can exit the diagnostic mode.
  3. {Line Diag} screen is displayed.
  4. Check the connection status with the {Connection} in the {Line Diag} screen.
    G13226526Courtesy of SUBARU OF AMERICA, INC.
    Item Contents Inspection
    GPS GPS antenna connection Check that the display shows OK. (Models with GPS antenna only)
    MIC MIC connection If the display shows OK, check that the microphone input level in the {Microphone} item varies depending on the sound and voice.
    Rr_CAM Rr CAM Video signal Check that the display shows OK.
    AUX AUX connection Connect the pin jack for check into the AUX terminal, and check that the display shows OK.
    USB1 USB connection Connect the memory for check into the USB terminal, and check that the display shows OK.
    USB2 USB connection (DCM) Check that the display shows OK.
    SXM SXM connection Check that the display shows OK. (Models with SXM only)
    CAN CAN connection Check that the display shows OK.
    Leather AMP HK amplifier connection Check with the {Audio Check} item. (Leather seat type with woofer)
    Cloth AMP HK amplifier connection Check with the {Audio Check} item. (Cloth seat type with woofer)
scientia non olet · About LEMON Manuals