LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Forester Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Oil Control Solenoid >> Removal >> Intake
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Oil Control Solenoid: Removal: Intake

  1. Disconnect the ground terminal from battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
  2. Remove the air intake duct (rear). Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE DUCT>REMOVAL
  3. Disconnect the connector (A) and remove the oil control solenoid.
    G13223960Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the backup ring from the oil control solenoid.
  1. Disconnect the ground terminal from battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
  2. Disconnect the connector (A) and remove the oil control solenoid.
    G13223961Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the backup ring from the oil control solenoid.
scientia non olet · About LEMON Manuals