LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Legacy Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transmission (Diagnostics) (1 Of 2) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P0717: Input/Turbine Shaft Speed Sensor "A" Circuit No Signal >> General Description >> Execution Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Execution Condition

Secondary parameters Execution condition
12 V battery system voltage
Engine speed
Transmission range
Measured primary pulley shaft speed
10 V or more
400 rpm or more
Drive
or
Reverse
500 rpm or more