DTC U0416: Invalid Data Received From Vehicle Dynamics Control Module
DTC detecting condition:
When data error received from VDC is detected for 2 seconds or 3 times.
Trouble symptom:
The following functions do not operate.
- After shifting the select lever from R to any positions other than R, reverse-linked recovery operation may start immediately even while the vehicle is stopped.
- After shifting the select lever from R to any positions other than R, reverse-linked recovery operation may not start immediately after the vehicle is started to drive.
NOTE:
Perform the diagnosis for LAN system and VDCCM. Ref. to LAN SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE
. Ref. to BRAKE CONTROL (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE
.