Rear Gate Opener Button: Removal
NOTE:
The switch opener rear gate of the model with keyless access with push button start is integrated with the rear lock button. For operation procedures, refer to "Rear Lock Button". Ref. to SECURITY AND LOCKS>REAR LOCK BUTTON>REMOVAL .
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>REMOVAL .
- Remove the garnish assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>REMOVAL .
- Remove the garnish assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>DISASSEMBLY .
- Press the lock portions on both sides and remove the switch opener rear gate.
CAUTION:
When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.