LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Rear Gate System >> Handsfree Power Rear Gate >> Installation >> HANDSFREE Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

HANDSFREE Sensor

CAUTION: Make sure that the harness grommet of the garnish assembly is securely installed. If not properly installed, this may cause leaks.
  1. Install the handsfree sensor.
  2. Install the garnish assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>ASSEMBLY .
  3. Install the garnish assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>INSTALLATION .
  4. Install the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals