Electric Fluid Pump: Installation

Install a new CVTF filter.
NOTE: Perform only when the CVTF filter is removed.
Install a new O-ring.
NOTE: Apply CVTF to the O-rings.
Install the electric oil pump, and connect the connector.
Tightening torque:

22 N.m (2.2 kgf-m, 16.2 ft-lb)
Install the electric oil pump cover and ground terminal.
Tightening torque:

16 N.m (1.6 kgf-m, 11.8 ft-lb)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Fill with CVTF. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>CVTF>REPLACEMENT .