Brake Pedal: Inspection
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Move the pedal pads in a horizontal direction with a force of approx. 10 N (1 kgf, 2 lbf), and check that the brake pedal deflection is in the range of specifications.CAUTION:
If excessive deflection is noted, replace the bushing with a new part.
Limit: 4 mm (0.157 in) or less
- Check the position of the pedal pad.
Brake pedal height L:
Standard: 129 - 139 mm (5.08 - 5.47 in)
Brake pedal free play A:
Standard: 0.5 - 2.7 mm (0.02 - 0.11 in) [When pulling the brake pedal upward with a force of less than 10 N (1 kgf, 2 lbf)]
- If it is not within the specification, loosen the lock nuts of operating rod, and rotate the rod to adjust the pedal height L within the specification.
- Tighten the lock nut.NOTE:
Check the brake pedal height. When adjusting, also adjust the stop light switch assembly.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)