LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Front Suspension And Wheel Alignment) >> Wheel Alignment >> Inspection >> Camber
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Wheel Alignment: Inspection: Camber

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the tires on the turning radius gauge.
    NOTE:

    Make sure that the ground contact surfaces of the front tires and rear tires are at the same level. 

  2. Set the alignment gauge adapter into the center of wheel, and then set the alignment gauge.
    G14601704Courtesy of SUBARU OF AMERICA, INC.
  3. Measure the camber angle in accordance with the operation manual for alignment gauge.
Model Front camber (difference between RH and LH 45' or less) Rear camber (difference between RH and LH 45' or less)
17-inch model -0°40'±45' -1°25'±45'
18-inch model -0°40'±45' -1°35'±45'
scientia non olet · About LEMON Manuals