Vanity Mirror Light: Removal
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The vanity mirror light is integrated into the sun visor assembly. Replace the sun visor assembly if faulty. Ref. to EXTERIOR/INTERIOR TRIM>SUN VISOR>REMOVAL
- Do not remove the sun visor assembly if removing the bulb only.
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
- Remove the sun visor assembly. Ref. to EXTERIOR/INTERIOR TRIM>SUN VISOR>REMOVAL
- Remove the vanity mirror light bulb.CAUTION:
Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
NOTE:When using a flat tip screwdriver, use an appropriate sized tool for the insertion opening, apply protective tape or cloth around the tool, and be careful not to cause damage.