Active Test: Operation
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Be sure to perform the active test while the engine is not running.
- After executing the active test, execute the Clear Memory Mode. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS)>CLEAR MEMORY MODE .
- On «Start» display, select «Diagnosis».
- On «Vehicle selection» display, input the vehicle information and select «Confirmed».
- On «Main Menu» display, select «Each System».
- On «Select System» display, select «Transmission Control System».
- On «Select Function» display, select «Active Test».
| Item | SSM display | Execution condition |
|---|---|---|
| Activating the actuator ON/OFF | F & R Clutch Solenoid | When all of the following conditions are met:
|
| Secondary Solenoid | ||
| Primary Down Solenoid | ||
| Primary Up Solenoid | ||
| AWD Solenoid | ||
| Lock-Up Duty Solenoid | ||
| Lock-Up ON/OFF Solenoid |
NOTE:
For detailed operation procedures, refer to "Application help".