Camshaft Position Sensor: Removal: Intake

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

RH SIDE

Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>Air Intake Duct>REMOVAL .

Disconnect the connector (A) and remove the camshaft position sensor.

Courtesy of SUBARU OF AMERICA, INC.

LH SIDE

Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .

Disconnect the connector (A) and remove the camshaft position sensor.

Courtesy of SUBARU OF AMERICA, INC.