Crankshaft Position Sensor: Removal
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
.
- Remove the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>Intercooler>REMOVAL
.
- Disconnect the connector (A) and remove the crankshaft position sensor.
 Courtesy of SUBARU OF AMERICA, INC.
|