Oil Control Solenoid: Removal: Intake
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- RH SIDE
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>Air Intake Duct>REMOVAL .
- Disconnect the connector (A) and remove the oil control solenoid.
- Remove the backup ring from the oil control solenoid.
- LH SIDE
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the reservoir tank. Ref. to COOLING (H4DOTC)>Reservoir Tank>REMOVAL .
- Remove the clip securing the engine wiring harness.
- Disconnect the connector (A) and remove the oil control solenoid.
- Remove the backup ring from the oil control solenoid.