Differential Case

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Remove the side bearing inner race using ST1, ST2, ST3 and a press.
Preparation tool:

ST1: REMOVER (498077000)

ST2: REMOVER (899864100)

ST3: SEAT (398497701)

Courtesy of SUBARU OF AMERICA, INC.
Using the ST, remove the spring pin.
Preparation tool:

ST: STRAIGHT PIN REMOVER (899904100)

Courtesy of SUBARU OF AMERICA, INC.
Remove the pinion shaft, and remove the differential bevel pinion, differential bevel gear and thrust washer.

Courtesy of SUBARU OF AMERICA, INC.